M56x4 tap drill size
Use a 52.00 mm drill (52.00 mm) for a M56x4 cutting tap at 75% thread.
| Tap type | Drill | Decimal (mm) |
|---|---|---|
| Cutting tap, 75% thread | 52.00 mm | 52.00 |
| Cutting tap, 50% thread (hard material) | 53.5 mm | 53.50 |
| Roll / form tap, 65% thread | 54.0 mm | 54.00 |
- Pitch
- 4 mm
- Major Ø
- 56.00
- Pitch Ø
- 53.40
- Minor Ø
- 51.67
M56x4 tapping speeds and feeds
Feed = pitch (4 mm per rev). Starting points for a general-purpose HSS cut tap:
- Aluminum 6061 / 7075: 120 RPM · 480 mm/min
- Free-machining / mild steel: 30 RPM · 120 mm/min
- 304 / 316 stainless: 20 RPM · 80 mm/min
Common questions
- What size drill for a M56x4 tap?
- Use a 52.00 mm drill (52.00 mm) for a M56x4 cutting tap at 75% thread.
- What drill for a M56x4 roll (form) tap?
- About 54.23 mm; the nearest standard drill is 54.0 mm. Check your tap maker's table.
Other Metric fine sizes
Drill sizes from Machinery's Handbook and ASME B1.1/B1.13M; roll tap sizes from the form-tap formula. Tap and insert makers' tables are authoritative.
Free for machinists & programmers
Put your skills on a free talent profile
Machines, controls, certs and saved calculations in one profile shops can find.
Create free profile For your shop
Bring shift handoffs to your shop
Stop losing job status between shifts. Every station's notes, counts and issues, handed off cleanly.
See shift handoffs