M10x1 tap drill size
Use a 9.00 mm drill (9.00 mm) for a M10x1 cutting tap at 75% thread.
| Tap type | Drill | Decimal (mm) |
|---|---|---|
| Cutting tap, 75% thread | 9.00 mm | 9.00 |
| Cutting tap, 50% thread (hard material) | 9.4 mm | 9.40 |
| Roll / form tap, 65% thread | 9.6 mm | 9.60 |
- Pitch
- 1 mm
- Major Ø
- 10.00
- Pitch Ø
- 9.35
- Minor Ø
- 8.92
M10x1 tapping speeds and feeds
Feed = pitch (1 mm per rev). Starting points for a general-purpose HSS cut tap:
- Aluminum 6061 / 7075: 680 RPM · 680 mm/min
- Free-machining / mild steel: 190 RPM · 190 mm/min
- 304 / 316 stainless: 100 RPM · 100 mm/min
Tap speeds and feeds by size · 9.00 mm drill size and speeds
Common questions
- What size drill for a M10x1 tap?
- Use a 9.00 mm drill (9.00 mm) for a M10x1 cutting tap at 75% thread.
- What drill for a M10x1 roll (form) tap?
- About 9.56 mm; the nearest standard drill is 9.6 mm. Check your tap maker's table.
Other Metric fine sizes
Drill sizes from Machinery's Handbook and ASME B1.1/B1.13M; roll tap sizes from the form-tap formula. Tap and insert makers' tables are authoritative.
Free for machinists & programmers
Put your skills on a free talent profile
Machines, controls, certs and saved calculations in one profile shops can find.
Create free profile For your shop
Bring shift handoffs to your shop
Stop losing job status between shifts. Every station's notes, counts and issues, handed off cleanly.
See shift handoffs