Pipe tap drill chart (NPT, NPTF, BSPT)

    Tap drills for taper pipe threads when you tap without a taper reamer. NPTF dryseal threads usually take a slightly larger drill than NPT in the same size; BSPT uses a 55° Whitworth form and different pitches.

    Open calculatorDownload data (JSON)
    Pipe tap drills without reaming
    SizeTypeTPITap drillInchmm
    1/16NPT27D0.24606.25
    1/8NPT27Q0.33208.43
    1/4NPT187/160.437511.11
    3/8NPT189/160.562514.29
    1/2NPT1445/640.703117.86
    3/4NPT1429/320.906223.02
    1NPT11.51-9/641.140628.97
    1-1/4NPT11.51-31/641.484437.70
    1-1/2NPT11.51-47/641.734444.05
    2NPT11.52-13/642.203155.96
    2-1/2NPT82-5/82.625066.68
    3NPT83-1/43.250082.55
    3-1/2NPT83-3/43.750095.25
    4NPT84-1/44.2500107.95
    1/16NPTF27D0.24606.25
    1/8NPTF27R0.33908.61
    1/4NPTF187/160.437511.11
    3/8NPTF1837/640.578114.68
    1/2NPTF1445/640.703117.86
    3/4NPTF1459/640.921923.42
    1NPTF11.51-5/321.156229.37
    1-1/4NPTF11.51-1/21.500038.10
    1-1/2NPTF11.51-47/641.734444.05
    2NPTF11.52-7/322.218856.36
    2-1/2NPTF82-39/642.609466.28
    3NPTF83-15/643.234482.15
    3-1/2NPTF83-3/43.750095.25
    4NPTF84-1/44.2500107.95
    1/8NPS27S0.34808.84
    1/4NPS1829/640.453111.51
    3/8NPS1819/320.593815.08
    1/2NPS1447/640.734418.65
    3/4NPS1415/160.937523.81
    1NPS11.51-3/161.187530.16
    1-1/4NPS11.51-33/641.515638.50
    1-1/2NPS11.51-3/41.750044.45
    2NPS11.52-7/322.218856.36
    2-1/2NPS82-21/322.656267.47
    3NPS83-9/323.281283.34
    3-1/2NPS83-25/323.781296.04
    4NPS84-9/324.2812108.74
    1/8BSPT288.4 mm (21/64)0.32818.40
    1/4BSPT1911.2 mm (7/16)0.437511.20
    3/8BSPT1914.75 mm (37/64)0.578114.75
    1/2BSPT1418.25 mm (23/32)0.718818.25
    3/4BSPT1423.75 mm (15/16)0.937523.75
    1BSPT1130 mm (1-11/64)1.171930.00
    1-1/4BSPT1138.5 mm (1-33/64)1.515638.50
    1-1/2BSPT1144.5 mm (1-3/4)1.750044.50
    2BSPT1156 mm (2-3/16)2.187556.00
    2-1/2BSPT11Bore to ~72.226 mm (D1 at gauge plane)2.843572.23
    3BSPT11Bore to ~84.926 mm (D1 at gauge plane)3.343584.93
    4BSPT11Bore to ~110.072 mm (D1 at gauge plane)4.3335110.07
    1/16BSPP28G0.26106.63
    1/8BSPP2811/320.34388.73
    1/4BSPP1929/640.453111.51
    3/8BSPP1919/320.593815.08
    1/2BSPP143/40.750019.05
    5/8BSPP1453/640.828121.03
    3/4BSPP1431/320.968824.61
    7/8BSPP141-7/641.109428.18
    1BSPP111-13/641.203130.56
    1-1/4BSPP111-35/641.546939.29
    1-1/2BSPP111-25/321.781245.24
    1-3/4BSPP1122.000050.80
    2BSPP112-1/42.250057.15
    2-1/2BSPP11Bore to ~72.226 mm (D1)2.843572.23
    3BSPP11Bore to ~84.926 mm (D1)3.343584.93
    3-1/2BSPP11Bore to ~97.372 mm (D1)3.833597.37
    4BSPP11Bore to ~110.072 mm (D1)4.3335110.07

    NPT and NPTF: Tapco pipe tap chart (NPT cross-checked with OSG). BSPT: ISO 7-1 charts (ring-plug gage data, FWB, Allied Machine).

    Common questions

    What tap drill for 1/8 NPT?
    Q (0.332 in) for NPT; R (0.339 in) is common for 1/8 NPTF dryseal.
    What tap drill for 1/4 BSPT?
    11.2 mm (7/16 in).
    Can I use an NPT tap for BSPT?
    No. BSPT has a 55° thread angle and 19 TPI at 1/4, versus 60° and 18 TPI for NPT.

    Calculators that use this data

    Drill Chart & Size FinderNearest-drill finder over the full drill chart (#97-#1, A-Z, 1/64-4 in, 0.1-60 mm), drill speeds and pecks, Silver & Deming, aircraft and center drills, counterbores and reamer pre-drills.Tap Drill & Thread % CalculatorPercent of thread for any drill (cut and form taps), 75 / 65 / 50% tap drills, UNC / UNF / metric chart with thread limits, every thread to 4 in and M64, pipe taps and STI / Helicoil.

    Read the guide

    More reference charts

    Free for machinists & programmers

    Put your skills on a free talent profile

    Machines, controls, certs and saved calculations in one profile shops can find.

    Create free profile
    For your shop

    Bring shift handoffs to your shop

    Stop losing job status between shifts. Every station's notes, counts and issues, handed off cleanly.

    See shift handoffs